Anhui Aode Mining Machinery Equipment Technology Co., Ltd

Home 丨 Product

13530 type pick powder surfacing welding

Pick series

市场价:0.00

价格:0.00

In order to improve the service life of cut-off teeth and enhance the safety of underground mining, laser cladding technology is used to clad the head of cut-off teeth with non-sparking tungsten carbide powder, and the hardness of the clad layer is ≥60HRC, which protects the head and improves the wear resistance, controls the sparks, and effectively improves the safety of mining site. Specific technical requirements are 　　1、Appearance quality: The surface of the tooth body is smooth and smooth, without cracks, folds, dents and other defects visible to the naked eye, and the surface of the tooth body takes anti-rust measures. 　　2, surface hardness: tooth body after heat treatment, tooth body head surface hardness ≥ 40HRC, tooth body shank surface hardness 38-42HRC 　　3, impact toughness: tooth body after heat treatment impact toughness ≥ 49J/cm² 　　4, brazing seam shear strength: tooth body and carbide brazing seam shear strength ≥ 180MPa 　　5、Fullness of the weld seam: the welding seam is filled with solder of not less than 80%. 　　6, cladding layer hardness cladding layer hardness ≥ 60HRC 7、Cracking check: the weld area and the welding material and the base material bonding surface shall not have a crack
17017 type pick laser cladding

Pick series

市场价:0.00

价格:0.00

In order to improve the service life of cut-off teeth and enhance the safety of underground mining, laser cladding technology is used to clad the head of cut-off teeth with non-sparking tungsten carbide powder, and the hardness of the clad layer is ≥60HRC, which protects the head and improves the wear resistance, controls the sparks, and effectively improves the safety of mining site. Specific technical requirements are 　　1、Appearance quality: The surface of the tooth body is smooth and smooth, without cracks, folds, dents and other defects visible to the naked eye, and the surface of the tooth body takes anti-rust measures. 　　2, surface hardness: tooth body after heat treatment, tooth body head surface hardness ≥ 40HRC, tooth body shank surface hardness 38-42HRC 　　3, impact toughness: tooth body after heat treatment impact toughness ≥ 49J/cm² 　　4, brazing seam shear strength: tooth body and carbide brazing seam shear strength ≥ 180MPa 　　5、Fullness of the weld seam: the welding seam is filled with solder of not less than 80%. 　　6, cladding layer hardness cladding layer hardness ≥ 60HRC 7、Cracking check: the weld area and the welding material and the base material bonding surface shall not have a crack
9525 insert airfoil pick

Pick series

市场价:0.00

价格:0.00

Firstly, the alloy head of the cut-off gear is innovatively designed to change the shape of the alloy head, which can effectively protect the part of the tooth body supporting the alloy from being worn, so that the alloy head will not be dislodged due to premature wear of the tooth body guard iron and effectively prolong the working time of the alloy head. Secondly, the alloy strip inlaid around the cut-off head effectively protects the tooth body from rapid wear and tear, and the cut-off tooth has a longer working life. Sandstone should improve the alloy wear resistance, effectively protect the tooth body from rapid wear, extend the service life of the cut-off teeth, to create a better use value. Specific technical requirements are 　　1、Appearance quality: the tooth body appearance surface is smooth and smooth, no cracks, folds, dents and other defects visible to the naked eye, the tooth body surface to take anti-rust measures. 　　2, surface hardness: tooth body after heat treatment, tooth body head surface hardness ≥ 40HRC, tooth body shank surface hardness 38-42HRC. 　　3, impact toughness: tooth body after heat treatment impact toughness ≥ 49J/cm². 　　4, brazing seam shear strength: tooth body and cemented carbide brazing seam shear strength ≥ 180MPa. 　　5、Welding seam fullness: welding seam fullness of solder is not less than 80%. 　　6、Cracking check: the weld area and the welding material and the base material bonding surface shall not have cracks, carbide head shall not have cracks.
135 spiral groove pick

Pick series

市场价:0.00

价格:0.00

The rotary groove cut-off teeth are mainly designed for hard rock. 1. Special design is adopted for the shape, in order to prolong the service life and not to produce deflective grinding in use, the tooth head is designed into a rotary groove shape to increase the rotation function in the process of use, to achieve the effect of uniform wear around the alloy and the tooth head, and to improve the service life. 2. ≥3、The weight of the alloy head is obviously larger than the general cut-off teeth, which enhances the impact strength of the alloy, and the larger the alloy, the more durable it is. 4、The alloy is made of super coarse grain grade, which enhances the heat dissipation performance of the alloy head, and also has high toughness on the basis of high wear resistance. 5、In order to ensure the welding strength and shear strength of the alloy head, the industry advanced Interceptor brazing heat treatment line equipment, all use imported flux, solder. Specific technical requirements are 　　1, appearance quality: tooth body appearance surface is smooth and smooth, no cracks, folds, dents and other defects visible to the naked eye, the tooth body surface to take anti-rust measures. 　　2, surface hardness: tooth body after heat treatment, tooth body head surface hardness ≥ 40HRC, tooth body shank surface hardness 38-42HRC 　　3, impact toughness: tooth body after heat treatment impact toughness ≥ 49J/cm² 　　4, brazing seam shear strength: tooth body and carbide brazing seam shear strength ≥ 180MPa 　　5, welding seam fullness: welding seam filled with solder not less than 80%; 6, cladding layer hardness: cladding layer hardness ≥ 60HRC 　　7、Crack check: the weld area and the welding material and the base material bonding surface shall not have cracks, carbide head shall not have cracks.
170 tooth sleeve

Tooth seat and sleeve series

市场价:0.00

价格:0.00
80 tooth sleeve

Tooth seat and sleeve series

市场价:0.00

价格:0.00
Tooth holder series

Tooth seat and sleeve series

市场价:0.00

价格:0.00

Tooth seat and tooth sleeve series: use heat-treated high-strength alloy steel to maintain high strength, toughness and high wear resistance. The welding point at the bottom of the horseshoe-shaped seat has a fine arc, good drilling straightness, and high wear resistance. Seats, tooth sets, welcome people from all walks of life to inquire.
S12052 pick

Pick series

市场价:0.00

价格:0.00

General-purpose cut-off teeth have been in pursuit of continuous improvement in use performance and product performance and quality. Our company adopts the advanced technology at home and abroad, cold forging forming production tooth body, brazing alloy and heat treatment combined, synchronous completion, solve the technical problems that peers have not been able to solve, product quality significantly improved. Tooth body impact toughness ≥ 49J/cm²; brazing seam shear strength ≥ 180MPa; tooth body hardness ≥ 38HRC.
55# knife teeth

Pick series

市场价:0.00

价格:0.00

The cutting effect is better than that of ordinary picks, the spray dust removal effect is good, and the knife-shaped picks will not consume the gear sleeves, which can reduce the cost of use, improve work efficiency, and reduce maintenance time.
Type 84 pick (wear-resistant type)

Pick series

市场价:0.00

价格:0.00

Universal wear-resistant cut-off teeth, based on the universal type, are covered with a wear-resistant layer of alloy powder on the head of the tooth body, which is more wear-resistant than the universal cut-off teeth. Longer aging time. Tooth body impact toughness ≥ 49cm²; brazed seam shear strength ≥ 180MPa; tooth body hardness ≥ 38HRC
84 type pick powder surfacing welding

Pick series

市场价:0.00

价格:0.00

In order to improve the service life of cut-off teeth and enhance the safety of underground mining, laser cladding technology is used to clad the head of cut-off teeth with non-sparking tungsten carbide powder, and the hardness of the clad layer is ≥60HRC, which protects the head and improves the wear resistance, controls the sparks, and effectively improves the safety of mining site. Specific technical requirements are 　　1、Appearance quality: The surface of the tooth body is smooth and smooth, without cracks, folds, dents and other defects visible to the naked eye, and the surface of the tooth body takes anti-rust measures. 　　2, surface hardness: tooth body after heat treatment, tooth body head surface hardness ≥ 40HRC, tooth body shank surface hardness 38-42HRC 　　3, impact toughness: tooth body after heat treatment impact toughness ≥ 49J/cm² 　　4, brazing seam shear strength: tooth body and carbide brazing seam shear strength ≥ 180MPa 　　5、Fullness of the weld seam: the welding seam is filled with solder of not less than 80%. 　　6, cladding layer hardness cladding layer hardness ≥ 60HRC 7、Cracking check: the weld area and the welding material and the base material bonding surface shall not have a crack
84 spiral groove pick

Pick series

市场价:0.00

价格:0.00

The rotary groove cut-off teeth are mainly designed for hard rock. 1. Special design is adopted for the shape, in order to prolong the service life and not to produce deflective grinding in use, the tooth head is designed into a rotary groove shape to increase the rotation function in the process of use, to achieve the effect of uniform wear around the alloy and the tooth head, and to improve the service life. 2. ≥3、The weight of the alloy head is obviously larger than the general cut-off teeth, which enhances the impact strength of the alloy, and the larger the alloy, the more durable it is. 4、The alloy is made of super coarse grain grade, which enhances the heat dissipation performance of the alloy head, and also has high toughness on the basis of high wear resistance. 5、In order to ensure the welding strength and shear strength of the alloy head, the industry advanced Interceptor brazing heat treatment line equipment, all use imported flux, solder. Specific technical requirements are 　　1, appearance quality: tooth body appearance surface is smooth and smooth, no cracks, folds, dents and other defects visible to the naked eye, the tooth body surface to take anti-rust measures. 　　2, surface hardness: tooth body after heat treatment, tooth body head surface hardness ≥ 40HRC, tooth body shank surface hardness 38-42HRC 　　3, impact toughness: tooth body after heat treatment impact toughness ≥ 49J/cm² 　　4, brazing seam shear strength: tooth body and carbide brazing seam shear strength ≥ 180MPa 　　5, welding seam fullness: welding seam filled with solder not less than 80%; 6, cladding layer hardness: cladding layer hardness ≥ 60HRC 　　7、Crack check: the weld area and the welding material and the base material bonding surface shall not have cracks, carbide head shall not have cracks.

about Aode

Copyright © 2023 Anhui Aode Mining Machinery Equipment Technology Co., Ltd. All rights reserved Filing number: Anhui ICP Preparation No. 2023006298-2 Anhui ICPbei 2023006298-2 Technical support: Zhishengyuan

Contact Us

Tel：4000-558037

phone：19955823687

Fax：0558-4565515

email：sam@ahaode.cn

Add：Yingshang County Industrial Park, Anhui Province (intersection of Port Road and Guanbao Road)

Anhui Aode Mining Machinery Equipment Technology Co., Ltd

Mobile browsing